Need help?Do you have a question about the Swann AMI Trides and is the answer not in the manual?
General| Accuracy (ORP) | ±1 mV |
|---|---|
| Resolution (pH) | 0.01 pH |
| Resolution (ORP) | 1 mV |
| Resolution (Temperature) | 0.1 °C |
| Output Signal | 4-20 mA |
| Protection Class | IP65 |
| pH Range | 0 to 14 pH |
| Conductivity Range | 0 to 2000 µS/cm |
| ORP Range | -2000 to 2000 mV |
Explains the meaning of DANGER, WARNING, CAUTION symbols and mandatory signs for safety.
Covers user responsibility, spare parts, and general safety rules for operation.
Details sample requirements and disinfectants affecting measurement.
Outlines the AMI Trides system, its applications, signal outputs, and relays.
Lists technical specifications for power supply, sample requirements, and housing.
Provides a visual overview of instrument components with a labelled diagram.
A step-by-step checklist for proper installation and initial setup.
Details requirements and procedures for mounting the instrument panel.
Instructions on connecting sample inlet and waste lines.
Step-by-step guide for installing the reference electrode.
Procedure for installing the temperature sensor.
Guides installation of optional pH/Redox electrode after commissioning.
Essential information on electrical connections, including cable thicknesses.
A detailed diagram illustrating all electrical connections.
Covers power supply requirements, fuse ratings, and mains connection safety.
Explains input terminals and programming for external contacts.
Details alarm relay, configurations, and load limits.
Information on signal outputs, including current outputs and parameters.
Describes available interfaces like Profibus, Modbus, HART, and USB.
Steps to ensure proper sample flow before powering on.
Guidance on programming parameters for external devices and operation.
Instructions for calibrating the pH electrode using buffer solutions.
Method for correcting the Trides sensor using DPD photometric measurement.
Describes the function of each key on the control panel.
Explains the instrument's display layout, status indicators, and symbols.
Overview of the instrument's menu structure and main menu categories.
Guides on how to change instrument parameters like logger interval.
Recommends preventive maintenance frequency and tasks.
Step-by-step procedure for cleaning the Trides protective filter.
Detailed instructions for cleaning the Trides sensor, including precautions.
Procedure for cleaning the reference electrode, including materials to avoid.
Steps for cleaning the pH electrode, including wiping and rinsing.
Instructions for disassembling, cleaning, and reassembling the flow cell.
Covers calibration procedures for Process pH, Standard pH, Zero Trides, and Process Trides.
Safety warnings and procedures for replacing fuses.
Guidelines for proper shutdown and storage during extended non-use.
Lists typical and limit values for parameters to diagnose issues.
A list of common problems, their causes, and solutions.
Explains error codes (E0xx) and provides corrective actions for instrument faults.
To Next Page