AMI Trides
Program List and Explanations
A-96.250.111 / 211019 71
5 Installation
5.1 Sensors
5.1.1 Type of Electrode: If pH or Redox option is installed set the type of
electrode according.
5.1.2 pH Electrode: If pH option is installed, set “pH Electrode” to <with>.
5.1.3 Disinf.: Set the disinfectant you want measure:
Free chlorine
Hypochlorous acid
Ozone
Chlorine dioxide
Bromine
Iodine
Free + HoCl
5.1.4 Dimension: Set the dimension of the measured value either to ppm
or mg/l.
5.1.5 Standards: If you want to use standard solutions different from the
recommended SWAN standard solutions, enter the value of:
5.1.5.1 Standard 1:
Range: pH 1 to pH 13
5.1.5.2 Standard 2:
Range: pH 1 to pH 13
To Next Page
Loading...