Swann AMI Trides - Operation (Main Menu 4)

64 A-96.250.111 / 211019
AMI Trides
Program Overview
8.4. Operation (Main Menu 4)
3.1.4 Offset
Process Value
Simulation Alarm Relay 3.3.1*
3.3* Relay 1 3.3.2*
Relay 2 3.3.3*
Signal Output 1 3.3.4*
Signal Output 2 3.3.5*
Set Time (Date), (Time)
3.4*
Sensors Filter Time Const. 4.10.1*
4.10* Hold after Cal 4.10.2*
Default pH 4.10.3*
Relay Contacts Alarm Relay Alarm DIS. Alarm High 4.2.1.1.1*
4.2* 4.2.1* 4.2.1.1* Alarm Low 4.2.1.1.25*
Hysteresis 4.2.1.1.35*
Delay 4.2.1.1.45*
Alarm pH Alarm High 4.2.1.1.2*
4.2.1.2* Alarm Low 4.2.1.1.26*
Hysteresis 4.2.1.1.36*
Delay 4.2.1.1.46*
Relay 1/2 Setpoint 4.2.x.100*
4.2.2*/4.2.3* Hysteresis 4.2.x.200*
Delay 4.2.x.30*
Input Active 4.2.4.1*
4.2.4* Signal Outputs 4.2.4.2*
Output / Control 4.2.4.3*
Fault 4.2.4.4*
Delay 4.2.4.5*
Logger Log Interval 4.3.1*
4.3* Clear Logger 4.3.2* * Menu numbers