SYMEO LPR-1DHP User Manual

SYMEO Local Positioning Radar System
LPR-1DHP
Product Documentation
Commissioning LPR-1DHP with TCP/IP interface
Copyright © Symeo GmbH 2012
Page 19 of 40
If you firewall settings are too restrictive, you may not get access to the
LPR-1DHP station. In this case deactivate the firewall temporarely under
the tab Advanced.
The LPR Station should be available via your PC now. You can check the connection with a
ping to the LPR-1DHP station:
Open the Command-Window:
1. Push the Windows Start Button
2. Choose Run
3. Enter cmd and click OK
4. Enter in the cmd.exe window: ping 192.168.1.99 or the IP-address of the LPR-1DHP
station.
Figure 9 – Ping LPR-1DHP Station
The LPR-1DHP Station should answer with a Reply.

SYMEO LPR-1DHP Specifications

General

Brand	SYMEO
Model	LPR-1DHP
Category	Accessories
Language	English