SYMEO Local Positioning Radar System
LPR-1DHP
Product Documentation
Web Server for LPR-1DHP units with TCP/IP interface
Copyright © Symeo GmbH 2012
Page 20 of 40
7 Web Server for LPR-1DHP units with TCP/IP
interface
Having a LPR-1DHP station with TCP/IP interface the network settings for this station are
described in this chapter.
Therefore it is necessary to open a TCP/IP connection between your computer and the LPR-
1DHP station.
7.1 Open Web Server
The IP-address of the LPR-1DHP station is 192.168.1.99 per delivery
status except another IP-address is labeled outside the box.
You can establish a connection with your LPR-1DHP stations Web
server either via HTTP or HTTPS if the station has been configured for
this; see section "Settings", "HTTP" and "HTTPS" fields in the "Remote
Access" area.
In HTTP connections, the data is transmitted unencrypted. In HTTPS
connections, it is encrypted for transmission (AES-256, 256-bit
encryption).
Open your web browser. In the address bar of the web browser enter the IP-address of
the LPR-1DHP station: http://192.168.1.99 or https://192.168.1.99. Press Enter.
A connection is established with your LPR-
1DHP station.
In the case of an HTTPS connection, you
may see two dialog boxes. Confirm them
both with OK.
Then the Welcome page for the LPR-1DHP
station's Web server will appear.
Click the function you want in the navigation bar. The individual functions are described in
the following sections.
You will be prompted to enter your information
for authentication.
Enter user name symeo and the password,
and click OK. The password has been set
to 54all2u by the manufacturer.
To Next Page
Loading...
Need help?
General
