To Next Page

To Previous Page

OPERATION

Brew Pressure Graph

1 Bar: Low Pressure

Preinfusion

2 Bars: Bypass Pressure

Ramp Up

3 Bars: Pump Pressure

Full Pressure Brew (9 bar)

2 Bars: Bypass Pressure

Ramp Down

Using the Save Funcon:

The MVP and MVP Hydra are able to store the last brewing funcon performed to a temporary memory. The

save funcon can then be ulized to save the last brewing funcon performed as a recipe to any of the 6

programs on any or all of the groups. To save the last brewing funcon as a recipe follow the instrucons

below:

1. Hold the group top handle to the right for 2.5 seconds unl the shot mer display changes to save mode.

All groups will enter this mode as displayed on each shot mer.

2. Shi the group top handle momentarily right to cycle to the program you wish to save to.

3. Once the program number (or posion) you wish to save to is displayed, shi the group top handle mo-

mentarily to the le to save. The shot mer display will ash three mes to indicate it has been saved.

Repeat steps 2 and 3 on each group and for each program you wish to save to.

4. To exit save mode hold the group top handle to the right unl the shot mer display returns to opera-

on mode.

5. The newly saved recipe can be viewed and edited by accessing the program using the handheld control-

ler. See pages 40 and 41.

Save Mode

Shi le to save to the

program indicated

6 Program Locaons Shown.

Only the selected program

displays when in use.

Machines aer Serial Number

xxxxx3176 display programs as

numbers 1-6 instead of as squares.

Synesso MVP Series User Manual

Questions and Answers: