Synology DS1813+ - User Manual

Revision 1.0
THIS DOCUMENT CONTAINS PROPRIETARY
TECHNICAL INFORMATION WHICH IS THE
PROPERTY OF SYNOLOGY INCORPORATED AND
SHALL NOT BE DISCLOSED TO OTHERS IN
WHOLE OR IN PART, REPRODUCED, COPIED, OR
USED AS THE BASIS FOR DESIGN,
MANUFACTURING, OR SALE OF APPARATUS
WITHOUT WRITTEN PERMISSION OF SYNOLOGY
INCORPORATED.
How to Replace Hard Disk Backplane
for 8 bay/5 bay DiskStation

Summary

Synology DiskStation Backplane Replacement Introduction

Applied Models and Required Components for HDD Backplane

Lists compatible Synology DiskStation models and the specific HDD backplane components needed for replacement.

Tools Required for Hard Disk Backplane Replacement

Details the essential tools and equipment necessary to perform the HDD backplane replacement procedure.

DiskStation Backplane Replacement Procedures

Dismantle the Defective HDD Backplane

Step-by-step instructions for safely removing the faulty HDD backplane from the Synology DiskStation unit.

Install the Replacement HDD Backplane

Step-by-step instructions for installing the new HDD backplane into the Synology DiskStation unit.

Synology DS1813+ Specifications

General

CPU	Intel Atom Dual Core 2.13 GHz
Memory	2 GB DDR3 (expandable up to 4 GB)
Drive Bays	8
Link Aggregation	Yes
Hot Swappable HDD	Yes
RAID Support	Synology Hybrid RAID, Basic, JBOD, RAID 0, RAID 1, RAID 5, RAID 6, RAID 10
File System	EXT4
Operating System	DiskStation Manager (DSM)
Power Supply	250W
Maximum Internal Raw Capacity	32 TB (8 x 4 TB drives)
External Ports	4 x USB 2.0, 2 x eSATA
LAN Ports	4 x Gigabit