Need help?Do you have a question about the Synopsys TSMC180 and is the answer not in the manual?
Defines analog input parameters, range, common mode, and biasing.
Details digital output formats and key timing characteristics like clock frequency and latency.
Details analog inputs, references (vrefp, agndref) and ground pins.
Explains digital control, test, and power pins for operation and configuration.
Covers Deep Power-down, Power-down, and Standby modes for reduced consumption.
Describes standard ADC operation, input selection, and mode control.
Illustrates synchronization for normal operation, single, and successive conversions.
Shows timing for power-up from different power states.
Details starting, executing, and averaging offset measurement cycles.
Explains loading external calibration values and timing.
Describes scan chain signals and timing for production testing.
Guidelines for optimal placement and signal routing to minimize noise.
Recommendations for power supply connections and decoupling capacitors.
Constrains for routing power, reference, and ground signals.
Guidelines for routing analog inputs to prevent gain and offset errors.
Illustrates different IO ring connection cases for external references and inputs.
Details placement and type of decoupling capacitors for power and references.
General| Brand | Synopsys |
|---|---|
| Model | TSMC180 |
| Category | Network Hardware |
| Language | English |
To Next Page
