Systec D-45 - Door Lock System

V/D S ERIES
M ECHANICAL ASSEMBLIES
Revision: 2.1 3-5
3.17 Lift ......................................................................................... 82
3.17.1 Position and function ................................................................................. 82
3.17.2 Maintenance tasks ..................................................................................... 82
Diagrams
Fig. 1: V-40, V-55: Layout diagram of rear and front .......................... 10
Fig. 2: V-65 – 150: Layout diagram of rear and front ......................... 12
Fig. 3: D-23: Layout diagram of rear, right, left and top...................... 14
Fig. 4: D-45: Layout diagram of rear, right, left and top...................... 16
Fig. 5: D-65 – 200: Layout diagram of rear, right, left and top............ 18
Fig. 6: Pneumatic assembly ............................................................... 23
Fig. 7: Example: Position on pipe connection diagram ...................... 24
Fig. 8: Position of the microswitches that monitor the door lock ........ 26
Fig. 9: Controlling the scissor mechanism: Position on
pipe connection diagram ......................................................... 27
Fig. 10: Function diagram of the scissor mechanism,
locking ring open ..................................................................... 28
Fig. 11: Measuring the distance ........................................................... 31
Fig. 12: Pulling out the door seal ......................................................... 32
Fig. 13: Position of the door switch and fastening screws
(door cladding removed) ......................................................... 33
Fig. 14: Pneumatic assembly ............................................................... 35
Fig. 15: Door lock: Position on pipe connection diagram ..................... 36
Fig. 16: Measuring the distance ........................................................... 38
Fig. 17: Closed position ....................................................................... 40
Fig. 18: Secured position ..................................................................... 40
Fig. 19: Loosening the screws on the limit switch ................................ 42
Fig. 20: Measuring the distance ........................................................... 43
Fig. 21: Loosening the fastening screws on the panel ......................... 44
Fig. 22: Position of the spacer sleeves ................................................ 45
Fig. 23: Removing and loosening the screws ...................................... 46
Fig. 24: Loosening the screws ............................................................. 46
Fig. 25: Securing the screws using nuts .............................................. 47