Gas airtight suspended warm air heaters - EOLO
7
SYSTEMA S.p.A.
Rev. 10EE0112
3 GENERAL TECHNICAL SPECIFICATIONS
3.1 Description and operating specifications
EOLO suspended gas warm air heater is composed of a combustion chamber in stainless steel,
inside which a gaseous component (natural gas or LPG) is combusted. In just a few minutes the
external surfaces of the combustion chamber and fume tube nest, lapped by ambient air circulated by
the fans, reach their operating temperature.
The appliance operates automatically; the systems for electronic control, mixing, combustion, ignition,
suction of combustion air and discharge of fumes are housed in a compartment provided with an
inspection hatch that makes adjustment and maintenance operations easy to perform. A fan-limit
safety bi-thermostat controls start-up and shut-down of the fan unit, also shutting down the burner in
the case in which the supply air temperature exceeds the safety values permitted.
Suction of combustion air and discharge of fumes can be conveyed directly outside the building (type
C appliance); therefore, there is no communication between the combustion chamber and the indoor
environment (this guarantees maximum safety).
In the summer the fan unit can be operated alone to provide ambient comfort and provide a supply of
fresh air. To switch to this operation press the button on the aluminium front of the bi-thermostat.
To Next Page
Loading...