60
Operator´s manual round bale wrapper 7640
2x
10.10.5.8 Table position after unloading
Moves the table forwards until set angle for horizontal position is
reached.
10.10.5.9 RST
Reset. Moves the table to laoding position and opens the loading
arm.
Operating model C
10.10.6 Tool mode
Access via PIA mode by activation function key twice.
All functions are operated via the joystick. The sensors are ACTI-
VE and can prevent wrong handling.
Which functoins to operate are displayed and chosen by the
function key.
To Next Page
Loading...