Tabor 8020 - Page 8

4-6-1 Typical Controlled Systems 4-4
4-6-2 Connections 4-5
4-7 Changing GPIB Address 4-5
4-8 Bus Commands 4-5
4-8-1 Uniline Commands 4-6
4-8-2 Universal Multiline Commands 4-7
4-8-3 Addressed Commands 4-8
4-8-4 Unaddress Commands 4-9
4-8-5 Device Dependent Commands 4-9
4-8-6 Common Commands and Queries 4-9
4-9 Device Listing Formats 4-9
4-9-1 Function Element Summary 4-10
4-9-2 Seperator Function Element Summary 4-10
4-9-2-1 Program Message Unit Seperator 4-10
4-9-2-2 Program Data Seperator 4-10
4-9-2-3 Program Header Seperator 4-10
4-9-3 Program Message Terminator 4-11
4-9-4 Command Program Header 4-11
4-9-5 Query Program Header 4-11
4-9-6 Program Data 4-11
4-9-6-1 Character Program Data 4-11
4-9-6-2 Decimal Numeric Program Data 4-11
4-9-6-3 Suffix Program Data 4-12
4-9-6-4 Non-Decimal Program Data 4-12
4-9-6-5 Arbitrary Block Program Data 4-12
4-9-6-6 Expression Program Data 4-12
4-10 Device-Dependent Command Programming 4-12
4-10-1 Display Modify (D) 4-12
4-10-2 Operating Mode (P,V,A,O) 4-16
4-10-3 Trigger Mode (G,T) 4-16
4-10-4 Output Mode (C,B) 4-16
4-10-5 Waveform (U) 4-16
4-10-6 Parameter Programming 4-16
4-10-7 Common Commands 4-17
4-10-7-1 Set-ups (*SAV, *RCL) 4-18
4-11 Device Talking Formats 4-18
4-11-1 Function Element Summary 4-19
4-11-2 Seperator Function Element Summary 4-19
4-11-2-1 Response Message Unit Seperator 4-19
4-11-2-2 Response Data Seperator 4-19
4-11-2-3 Response Header Seperator 4-19
4-11-3 Response Message Terminator 4-19
4-11-4 Response Header 4-20
4-11-5 Response Data 4-20
Model 8020 Table of Contents
Page -3