Tait TP9400 Series P25 User Manual

P25 services 103
The LED glows red and a message may be
displayed to advise you whether the status update
has been sent successfully or not.
If an acknowledgement is not received from the
recipient’s radio, you will have the option of either
canceling or resending the request.
Status request
This feature is only available on P25 conventional
channels.
You can find out what another radio user is currently
doing by asking their radio to send you a status
update.
To send a status request:
1 Press Menu and select Services >
Status request.
2 Select the status request recipient from the list.
3 Press Send to.
A message showing the destination appears in the
display.
The LED glows red briefly. If the request was
successful, a message showing the status
appears in the display.
Status request
Car 2
Car 3
Send toCancel
Sending sts
rqst to
Car 2
Cancel
Status rx’d
At lunch Car 2
Cancel

Tait TP9400 Series P25 Specifications

General

P25 Phase	Phase 1 and Phase 2
Frequency Bands	VHF: 136-174 MHz, UHF: 380-520 MHz, 700/800 MHz: 764-870 MHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4V DC (Nominal)
MIL-STD	MIL-STD-810 C/D/E/F/G
Battery Life	Up to 12 hours (depending on usage)