EasyManuals Logo

Tait TP9400 Series P25 User Manual

Tait TP9400 Series P25
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Before using your radio 31
For your safety — battery
warning
Warning This radio uses a Lithium-ion battery. If the
battery is damaged or handled in an unsafe manner, it
can cause personal injury and/or damage to property.
Read the important safety information included with
your battery.
Attaching labels to the radio or
battery
Warning Do not cover the battery vent hole or the
vent hole on the radio chassis. If the vent on the
battery is obstructed, the battery may explode,
causing personal injury and/or damage to property. If
the vent on the radio is obstructed, audio quality and/
or key function may deteriorate and radio seals may
be damaged.
Notice Tait recommends that you do not affix
additional labels to the surfaces between the radio
chassis and the battery. The fit between these
surfaces is intentionally firm and any added thickness
will damage the points of attachment between radio
and battery.
Attaching a label to the front panel
If a customer requires an additional label, attach the
label in the spare label recess in the bottom edge of
the radio front panel. In this position, the label is still
visible while the battery is attached to the radio.
spare label recess

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tait TP9400 Series P25 and is the answer not in the manual?

Tait TP9400 Series P25 Specifications

General IconGeneral
P25 PhasePhase 1 and Phase 2
Frequency BandsVHF: 136-174 MHz, UHF: 380-520 MHz, 700/800 MHz: 764-870 MHz
Operating Temperature-30°C to +60°C (-22°F to +140°F)
Operating Voltage7.4V DC (Nominal)
MIL-STDMIL-STD-810 C/D/E/F/G
Battery LifeUp to 12 hours (depending on usage)

Related product manuals