Tait TP9400 Series P25 User Manual

96 Scanning
Viewing group membership
1 In the Radio settings menu, select Edit groups
and select a scan group. Press Select.
2 In the Edit Group menu, select Group members
and press Select.
3 Scroll through the list of group members. The
names of the group members may be shortened.
4 The information that may appear is explained in
the example below.
Adding a channel to a group
1 In the Radio settings menu, select Edit groups
and select a scan group. Press Select.
2 In the Edit Group menu, select Add channel and
press Select.
A list of channels that are not group members
appears.
3 Select the channel you want to add and press OK.
Edit group
Group members
Add channel
SelectBack
Group members
A:Channel 1
A:Channel 2
transmit channel
channel name
zone
SelectBack
priority 1 channel
Add channel
C:Channel 5
C:Channel 6
OKBack

Tait TP9400 Series P25 Specifications

General

P25 Phase	Phase 1 and Phase 2
Frequency Bands	VHF: 136-174 MHz, UHF: 380-520 MHz, 700/800 MHz: 764-870 MHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4V DC (Nominal)
MIL-STD	MIL-STD-810 C/D/E/F/G
Battery Life	Up to 12 hours (depending on usage)