Tait TP9400 Series P25 User Manual

144 Charging and caring for batteries
Special conditions when using
IS radios
Intrinsically Safe (IS) radios and accessories are
certified by a third party to be safe to use in particular
hazardous locations, or in potentially explosive
atmospheres.
Warning Use only a Tait-supplied, IS-approved
battery and charger with an IS radio. Fitting a battery
or using a charger that is not IS-approved creates a
risk of explosion which could cause serious injury or
death.
Warning Do not charge the battery in a hazardous
location. An explosion could cause serious injury or
death.
For detailed information about IS radios and
accessories, refer
to "Intrinsically Safe radios and
accessories" on page 10
.

Tait TP9400 Series P25 Specifications

General

P25 Phase	Phase 1 and Phase 2
Frequency Bands	VHF: 136-174 MHz, UHF: 380-520 MHz, 700/800 MHz: 764-870 MHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4V DC (Nominal)
MIL-STD	MIL-STD-810 C/D/E/F/G
Battery Life	Up to 12 hours (depending on usage)