Tait TP9400 Series P25 - Page 108

108 P25 services
The LED glows red and a message appears in the
display.
If the radio has been successfully immobilized, an
acknowledgement message is displayed.
Sending a radio uninhibit request
1 Press Menu and select Services >
Radio uninhibit.
2 Scroll to the radio you wish to make operable.
3 Press Send to.
The LED glows red and a message appears in the
display.
If the radio has been successfully returned to
operation, an acknowledgement message is
displayed.
If an acknowledgement is not received from the
recipient’s radio, you will have the option of either
canceling or resending the request.
Sending
inhibit to
Car 2
Cancel
Ack received
OK
Radio uninhibit
Car 2
Car 3
Send toCancel
Sending
uninhibit to
Car 2
Cancel
Ack received
OK