Tait TP9400 Series P25 User Manual

For your safety 15
Entity parameters
The Entity Concept allows interconnection of IS
equipment with associated equipment when the following
is true:
Ui
≥ Uo, Ii ≥ Io, Pi ≥ Po, Ci ≤ Co, Li ≤ Lo, and Li/Ri ≤ Lo/Ro.
The installation must be in accordance with the following
standards:
■ EN/IEC 60079-25
■ relevant local regulations.
TP9300/TP9400 IS radios have the following entity
parameters.
Accessory port:
Radio battery port:
Battery:
Ambient pollution degree: 4
Overvoltage category: I
■ Uo 7.2 V
■ Io 0.42 A
■ Po 1.3 W
■ Co 1.97 μ F
■ Lo 100 μ H
■ Lo/Ro 20 μ H/ Ω
■ Ui 8.4 V
■ Ii IIA: 2.9 A
IIC: 1.9 A
■ Um 9.0 V (charging)
■ Ci 1.2 μ H
■ Li 5.7 μ H
Charging Terminals
■ Um 9.0 V
Battery Output (radio port)
■ Uo 8.4 V
■ Io IIA: 2.9 A
IIC: 1.9 A
■ Co 1.2 μ F
■ Lo 5.7 μ H

Tait TP9400 Series P25 Specifications

General

P25 Phase	Phase 1 and Phase 2
Frequency Bands	VHF: 136-174 MHz, UHF: 380-520 MHz, 700/800 MHz: 764-870 MHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4V DC (Nominal)
MIL-STD	MIL-STD-810 C/D/E/F/G
Battery Life	Up to 12 hours (depending on usage)