EasyManuals Logo

Tait TP9400 Series P25 User Manual

Tait TP9400 Series P25
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
For your safety 25
information on IS radios refer to
"Intrinsically Safe radios
and accessories" on page 10
.
Attaching of labels
Warning
Do not obstruct the vent hole on the battery or
the vent hole on the radio chassis label. If the vent on the
battery is obstructed, the battery may explode, causing
personal injury and/or damage to property. If the vent on
the radio is obstructed, audio quality and/or key function
may deteriorate and radio seals may be damaged.
Caution
Tait recommends that you do not affix additional
labels to the surfaces between the radio chassis and the
battery. The fit between these surfaces is intentionally firm
and any added thickness will damage the points of
attachment between radio and battery. If you must attach
a customized label, use only a thin gummed paper label
applied to the bottom 25% of the radio chassis label and/
or to the top 25% of the battery label. Do not obstruct the
vent holes (see Warning above). Do not allow the paper
label to extend beyond the recessed label area or to
conceal relevant product information.
Use of lithium-ion batteries
Warning
A damaged battery can cause an explosion or
fire, and can result in personal injury and/or property
damage. To prevent personal injury and/or damage to
property, read the important safety information supplied
with the battery.
Short-circuiting battery contacts
Warning
Do not short-circuit the battery contacts,
neither intentionally nor accidentally, e.g. by placing the
battery with conductive materials such as keys or jewelry
inside a pocket or container. Short-circuiting the battery
contacts can heat up the conductive material and cause
personal injury and/or damage to property.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tait TP9400 Series P25 and is the answer not in the manual?

Tait TP9400 Series P25 Specifications

General IconGeneral
P25 PhasePhase 1 and Phase 2
Frequency BandsVHF: 136-174 MHz, UHF: 380-520 MHz, 700/800 MHz: 764-870 MHz
Operating Temperature-30°C to +60°C (-22°F to +140°F)
Operating Voltage7.4V DC (Nominal)
MIL-STDMIL-STD-810 C/D/E/F/G
Battery LifeUp to 12 hours (depending on usage)

Related product manuals