6-8
TROUBLESHOOTING
RESTARTING AFTER ADDING
FUEL
BLEEDING AIR FROM THE FUEL SYSTEM
1. Add fuel.
2. Open the valve (2) of the water separator.
Note: Air in the fuel system causes the
engine to fail to start or to have other
problems. Always bleed air when the fuel
tank is emptied or when there is air in the
fuel system.
RESTARTING AFTER ADDING FUEL
3. Turn the starter key to the ON position and
hold it for about 10 to 15 seconds.
The automatic air bleeder bleeds air from
the fuel system.
To Next Page
Loading...
