1-12
SAFETY
PRECAUTIONS WHEN
OPERATING
Ensure good visibility
• When working in dark places, turn on the
machine’s working lights and headlights
and additional lighting equipment installed,
as necessary.
• When visibility is poor due to bad weather
(fog, snow, rain or a cloud of dust), stop
operating the machine and wait until
visibility improves.
PRECAUTIONS WHEN OPERATING
Do not permit riders on the machine
Do not allow anyone to ride on any part of
the machine at any time while traveling or
operating.
Check if the work area is safe and secure
before operation
• Confirm the performance limits of the
machine.
• Use a signal person at road shoulders,
narrow places or where your vision is
obstructed.
• Never allow anyone to enter the machine’s
slewing radius and path.
• Signal your intention to move by sounding
the horn.
• There is a blind spot in the rear of the
machine. Before traveling in reverse, slew
the cab around to check that the area is
safe and clear, as necessary.
To Next Page
Loading...
Need help?
General
