2-4
CONTROLS
COVERS
STARTER KEY
The starter key is used to start and stop the
engine, as well as to lock and unlock the
following components:
• Fuel filler cap
• Cab door
• Manual storage compartment
• Engine hood
• Covers
COVERS
STORAGE BOX
1. To unlock this box, insert the starter key
and turn it counterclockwise.
2. Open the cover (1).
MAINTENANCE COVER
Open this cover to perform a maintenance
operation of the control valve or to switch the
pattern of the operating lever.
1. To unlock this box, insert the starter key
and turn it counterclockwise.
2. Open the cover (1).
To Next Page
Loading...
