1-25
SAFETY
Prohibit access by unauthorized persons
Do not allow unauthorized personnel in the
work area while working. Be careful when
grinding, welding or using a hammer. You
could be injured by flying debris from the
machine.
Prepare work area
• Select a firm, level work area. Make sure
there is adequate light and, if indoors,
ventilation.
• Clear obstacles and dangerous objects.
Eliminate slippery areas.
Always keep the machine clean
• Clean the machine before performing
maintenance.
• Stop the engine before washing the
machine. Cover the electrical parts so that
water cannot enter.
Water on electrical parts could cause
short-circuits or malfunctions. Do not use
water or steam to wash the battery,
electronic control components, sensors,
connectors or the operator’s compartment.
PRECAUTIONS ON MAINTENANCE
Stop the engine before performing
maintenance
• Avoid lubrication or mechanical
adjustments while the machine is moving
or while the engine is running when the
machine is not moving.
• If maintenance must be performed with the
engine running, always work as a two
person team communicating each other.
· One person must sit in the operator’s
seat so that he/she can immediately stop
the engine when necessary. He/she must
take care not to touch the lever or pedal
unless necessary.
· The one who performs maintenance
must make sure to keep his/her body or
clothing away from the moving part of the
machine.
To Next Page
Loading...
Need help?
General
