Braking when descending slopes
OPERATING PROCEDURES
When descending slopes, the brakes are
applied automatically once the left control
lever are returned to the neutral position.
If the engine stops
If the engine stops when descending a
slope, set the left contr
ol lever to the neutral
position, stop the machine, then start the
engine.
Do not open the door while traveling on
slopes (if equipped with cab door)
Opening the door while traveling on slopes is
dangerous, as the force required to open
and close the door changes abruptly. Always
keep the door closed when traveling on
slopes.
To Next Page
Loading...
Need help?
General
