SYMPTOMS THAT ARE NOT
MALFUNCTIONS
The symptoms listed below are not
malfunctions.
•
The lift arms go up or stop by themselves
at the stroke end, when the bucket
operation is performed at the same time as
the lowering of the lift arms.
•
The travel motor produces noise when
stopped suddenly from its high speed
traveling.
•
The control valve produces noise if
excessive force is applied to the working
equipment or when it moved to the stroke
end.
•
It becomes less easy to operate the
machine when an attachment weighing
more than a standard bucket is installed.
SYMPTOMS THAT ARE NOT MALFUNCTIONS
To Next Page
Loading...
