IF A WARNING LAMP FLASHES
If an alarm is sounded or a warning lamp starts flashing during operation, park the machine in
a safe place and perform the remedy procedures described below.
Warning lamp Lamp name Causes and remedies
Battery charge
war
ning lamp
There is a problem with the fan belt or charger.
Check the fan belt for slack or breakage and adjust as
necessary.
If the lamp continues flashing after maintenance, ther
e is
likely a problem with the charger. Consult your sales or
service dealer for help.
Refer to “Inspecting and adjusting the fan belt” on page
5-24.
Engine oil
pr
essure
warning lamp
A problem has occurred in the engine lubrication system.
Inspect the engine oil level.
If the lamp is flashing when the oil is normal or if it
continues flashing after r
eplenishment of oil, consult your
sales or service dealer.
Refer to “Inspecting and replenishing the engine oil” on
page 5-17.
Coolant
temperatur
e
warning lamp
The coolant temperature is too high and the engine is
overheating.
Refer to “If the engine overheats” on page 6-3.
Air cleaner
war
ning lamp
The air cleaner filter is clogged.
Replace the elements immediately.
Refer to “Replacing the air cleaner elements” on page
5-34.
IF A WARNING LAMP FLASHES
To Next Page
Loading...
