Warning lamp Lamp name Causes and remedies
Pilot line filter
warning lamp
The hydraulic oil pilot line filter is clogged.
Stop the engine and replace the filter immediately.
Continuing to operate the machine while the lamp is
flashing could damage the line filter and hydraulic
equipment.
Refer to “Replacing the pilot line filter” on page 5-23.
Cold climate operation: Hydraulic oil is not warmed up.
Refer to “W
arming up the machine (hydraulic oil)” on
page 3-8.
Fuel level
war
ning lamp
The fuel level is low. Add fuel.
Refer to “Fuel filler port” on page 2-4.
Lever lock
war
ning lamp
The safety bar is raised and the controls are locked.
Lower the safety bar to turn off the lamp and to release
the lock.
Refer to “Safety bar” on page 2-24.
IF A WARNING LAMP FLASHES
To Next Page
Loading...
