2. To install the female connector or the cap
(1), align the notches and turn it clockwise
to tighten.
<14P connector M>
HDB34-18-14PN-059
Total max. Working current: 20 A
Max. Working current at each terminal: 13
A
SWITCHES
AUXILIARY HYDRAULIC SWITCHES
Auxiliary hydraulic buttons (A), (B)
Press auxiliary hydraulic buttons (A) or (B) to
control the flow of the oil in the auxiliary
hydraulic circuit.
(A) ...... Hydraulic oil flows to auxiliary
hydraulic line (a)
(B) ..... Hydraulic oil flows to auxiliary
hydraulic line (b)
These switches stay on while the buttons ar
e
pressed; they turn off when the buttons are
released (momentary mode).
Note that the switch (A) can be also operated
in the detent mode, in which the switch state
alternates between “ON” and “OFF” every
time the button is pressed. To switch to the
detent mode, use the detent mode switch
(D).
If the selector switch (C) has been tur
ned on
to select the one-way oil flow, only the switch
(A) can be used.
(A) ...... Hydraulic oil flows to auxiliary
hydraulic line (a)
The r
eturn oil returns to the hydraulic tank
through the line (b).
Slider Switch (Proportional control)
Proportional control allows for slow-to-fast
movement of auxiliary functions.
Example: If you move the slider switch half
way, the auxiliary function will move at
appr
oximately one-half speed.
Detent Mode Switch (D)
To Next Page
Loading...
