SWITCHES
TRAVEL SPEED BUTTON
Press this button to set the travel speed to
2nd (high) speed. Press it again to return to
1st (low) speed.
AUXILIARY LOW OPERATION SWITCH
This switch is used to decrease the flow rate
in the auxiliary hydraulic line so that the low-
pressure operation can be performed.
O ........Of
f
I ..........On
FRONT WIPER SWITCH (OPTIONAL)
REAR WIPER SWITCH (OPTIONAL)
IMPORTANT: If no washer fluid is
discharged, do not operate the washer.
Doing so may damage the pump.
IMPOR
TANT: Operating the wiper with no
moisture on the windshield will scratch
the glass. Use water or washer fluid when
operating the wiper.
IMPORTANT: In cold climates, the wiper
blade may freeze to the glass. Operating
the wiper forcibly may damage the wiper
motor.
O ............. Of
f
I ............... W
iper operates
PUSH ...... Sprays washer fluid when
pr
essed. Stops when released.
To Next Page
Loading...
Need help?
General
