PRECAUTIONS WHEN
OPERATING
Ensure good visibility
• When working in dark places, turn on the
machine’s working lights and headlights
and additional lighting equipment installed,
as necessary.
•
When visibility is poor due to bad weather
(fog, snow, rain or a cloud of dust), stop
operating the machine and wait until
visibility improves.
PRECAUTIONS WHEN OPERATING
Do not permit riders on the machine
Do not allow anyone to ride on any part of
the machine at any time while traveling or
operating.
Operate the machine only fr
om the
operator’s seat
When operating any lever, pedal or switch,
always do it while sitting in the operator’s
seat. Failure to do so could cause serious
injury or death.
Check if the work ar
ea is safe and secure
before operation
• Confirm the performance limits of the
machine.
•
Use a signal person at road shoulders,
narrow places or where your vision is
obstructed.
•
Never allow anyone to enter the machine’s
turning radius and path.
• Signal your intention to move by sounding
the horn.
• There is a blind spot in the rear of the
machine. Before traveling in reverse, check
that the area is safe and clear.
Keep your body inside the operator’s cab
It is dangerous to operate the machine while
putting your arms, feet or legs out of the
operator’s compartment. Never do it.
To Next Page
Loading...
Need help?
General
