COVERS
IGNITION KEY
The ignition key is used to start and stop the
engine, as well as to lock and unlock the
following components:
•
Fuel filler cap
• Cab door
• Manual storage compartment
• Engine hood
COVERS
FUEL FILLER PORT
WARNING
• Do not smoke and keep away from heat
or flame while filling the fuel tank.
• Fill the fuel tank in a well ventilated
place, with the engine turned off.
• Clean up spilled fuel immediately.
• Do not fill the fuel tank to capacity.
Allow room for oil expansion.
• Securely tighten the fuel filler cap.
Opening
1.
Open the cover, insert the key and turn it
counterclockwise to unlock the cap.
2. Turn the fuel filler cap counterclockwise
and remove it.
Closing
1.
Install the fuel filler cap to the fuel filler
port, and then turn the cap clockwise to
close it.
2.
Lock the fuel filler cap.
To Next Page
Loading...
Need help?
General
