Take care when handling unstable loads
PRECAUTIONS WHEN OPERATING
Unstable loads such as round items,
cylindrical items, and stacked plates may fall
from the bucket. When handling unstable
load, do not raise the bucket too high or tilt it
backward too far.
Do not suddenly stop or lower the
working equipment
Sudden lowering or stopping of the working
equipment could cause the machine to r
eact
and tip over. Operate the working equipment
carefully, especially when the bucket is
loaded.
A
void overloading and off-center loading
Filling the bucket in excess of the maximum
load or loading an off-center load could
cause the machine to become unstable and
result in the machine tipping over. Loading
should be done evenly, should be less than
the:
maximum load 855 kg (1880 lbs)
To Next Page
Loading...
Need help?
General
