Introduction 1
TW9 5
1.6 Location of safety signs
The safety signs are located in the following positions on the machine:
Locations of safety signs
1 Safety distance (left and right sides of lifting frame)
2 Safety distance
3 Danger of injury
4 Danger of crushing
Servicing and replacing safety signs
- The safety of the operator always has to come first.
- Safety signs must always be kept in good condition and legible.
- Replace any safety sign which has been damaged or disappeared.
- Use mild detergents and water to clean the safety signs.
- Do not use any detergents containing solvents.
- Always specify machine serial number and language when ordering safety signs.
To Next Page
Loading...
General