Working Operation of the machine 5
TW9 57
5.3 Changing work attachments
5.3.1 General notes
To achieve maximum utilization of the machine for
a variety of applications, a great number of work
attachments and accessories are available.
The machine is equipped with a quick-attach
system, to shorten the time it takes to change
attachments.
When mounting a multi-purpose bucket, front
sweeper, etc., an additional control circuit is
required.
Under certain circumstances, it is
possible to use the work attachments of
predecessor models on our machines.
When mounting work attachments of
predecessor models, however, these
may have to be adjusted and/or are
subject to utilization restrictions. The
installation of work attachments which
are not included in our product range
requires our written approval. It is
essential to consult your dealer before
mounting such a work attachment.
When the attachments have been
removed, they must be secured against
tilting and overturning to avoid possible
injuries to persons.
To Next Page
Loading...
General