TallyGenicom 2248 - Page 176

C-6 User's Manual
COMMAND SETS (IBM XL24E )
Function Command
Condensed characters on SI or ESC SI
Condensed and elite characters off DC2
Subscript or superscript printing on ESC S (n)
(subscript: n = 1, superscript: n = 0)
Subscript and superscript printing off ESC T
Underline on/off (on: n = 1, off: n = 0) ESC - (n)
Overline on/off (on: n = 1, off: n = 0) ESC
(n)
Horizontal Control
Space SP
Backspace BS
Carriage return CR
Elite characters on ESC :
Proportionally spaced characters on/off ESC P (n)
(on: n = 1, off: n = 0)
Vertical Control
Line feed LF
Form feed FF
Advance paper n/216 inch (1
< n < 255) ESC J (n)
Advance paper n/180 inch (in AG mode) ESC J (n)
(1
< n < 255)
Set line spacing to 1/8 lines ESC 0
Set line spacing to 7/72 inch ESC 1
Set line spacing to n/216 inch ESC 3 (n)
(0
< n < 255)
Set line spacing to n/180 inch (in AG mode) ESC 3 (n)
(0
< n < 255)
Preset line spacing to n/72 inch ESC A (n)
(1 < n < 255)
Preset line spacing to n/60 inch
(in AG mode) ESC A (n)
(1
< n < 255)
Set line spacing to 1/6 inch or to the value ESC 2
preset by line spacing command ESC A (n)