TallyGenicom 2248 - Page 94

USING SETUP MODE
User's Manual5-20
<PG LX1> Ones value 0 LINE, 1 LINE, 2 LINE, 3 LINE
setting for 4 LINE, 5 LINE, 6 LINE, 7 LINE
setting 8 LINE, 9 LINE
number of
lines per • The LINE setting depends on the line
page spacing setting 'LINE SP'.
• When 0 LINE is set, the line spacing
value is 11.0 IN (only when both 'PG
LX10' = '0 LINE' and 'PG LX1' = '0
LINE' are set).
<LFT-END> Specifies the print start column for
changing the left margin. Printing
starts at the position given by this
column plus your software-specified left
margin.
## COLM Column
1, 2, 3, ..., 41
MENU1 and
MENU2 Items
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
Options Description
LET-END
Software-
specified
margin