Taurus RX7 - Page 15

3 1 9
0 0 1
0 0 3
1 19
3 19
RX7
15
Step 5: Assembly of the rail
1. Remove the six pre-mounted
screws (319) from the joint support
of the rail (3).
2. Mount the rail (1) with the screws
(319) on the joint (3). Tighten the
screws.
Step 6: Assembly of the seat
1. Remove the four pre-mounted
screws (319).
2. Mount the seat (119) with the
four screws (319). Tighten the
screws.