Taylor C834 User Manual

27
McDonald's Intelligap Grills
Controls and Systems
141020
Step 3
The screen will display “BOTTOM TEMP ___”.
10:1 - CLAM
BOTTOM TEMP: 375F
Step 4
To adjust the setting, repeat Steps 2 - 4 from the
Remove Gap section on page 25.
Auto Selection
This feature is used to determine if the cooking
functions of a product will be automatically selected
or not.
Step 1
After selecting the item, press the key until the
screen displays “AUTO SELECTION”.
Example of a screen:
10:1 - CLAM
AUTO SELECTION: YES
Step 2
To change the selection, press the keys
until the desired selection (YES or NO) is displayed.
Press the key to save the changes.
Auto Gap
IMPORTANT! These settings should not be
changed unless authorized by a Taylor Service
Representative. This change should only be
performed to adjust deformed product. Before
attempting to change the product thickness settings,
cook the deformed product in the MANUAL mode.
Step 1
Press the key until the screen displays “AUTO
GAP”. The screen will show two sets of numbers.
The first set of numbers is the minimum gap of the
item. The second set of numbers is the maximum
gap of the item.
10:1 - CLAM
AUTO GAP: 230 TO 330
Step 2
To adjust the setting for the 1
st
set of numbers,
repeat Steps 2 - 4 from the Remove Gap section on
page 25.
After the OK key was pressed, the cursor moved to
the 2
nd
set of numbers. Adjust the second set of
numbers and press the OK key.
Programming Optional Menu Items
This feature is used to add optional menu items.
Step 1
Access the Control Menu by entering the Service
Menu passcode, per instructions on page 23.
Step 2
Press the key until the screen displays
“MENU ITEMS”.
Step 3
Press the key to scroll to “ADD ITEM”.
ADD ITEM

Taylor C834 Specifications

General

Brand	Taylor
Model	C834
Category	Grill
Language	English