Taylor C845 User Manual

25
McDonald's Intelligap Grills
Controls and Systems
141020
Remove Alarm
This feature is used to determine if the alarm will be
cancelled automatically or manually.
Step 1
After selecting the item, press the key until the
screen displays “REMOVE ALARM”.
10:1 - CLAM
REMOVE ALARM: AUTO
Step 2
To change the setting, press the keys
until the desired setting is displayed.
Press the key to save the changes.
Remove Gap
The REMOVE GAP feature is the finished gap
height of the selected product.
Step 1
After selecting the item, press the key until the
screen displays “REMOVE GAP”.
Gap is measured in 1,000th of an inch. In the
example below, the REMOVE GAP setting is 0.265
inch.
10:1 - CLAM
REMOVE GAP: 265
Step 2
To change the setting, press the keys
to display the correct setting for the first numerical
digit.
Step 3
Press the key to move the cursor to the next
numerical digit.
Step 4
Repeat this sequence for each numerical digit until
the correct setting is displayed.
Press the key to save the selection.
Step 5
The Stage 1 Time screen will display. Stage 1 Time
is the amount of time the product will cook during
the first stage of a multi-stage product. (Note: Stage
1 timers are only used for multi-stage product.)
10:1 - CLAM
STAGE 1 TIME: .010
Step 6
Repeat Steps 2 - 4 to adjust the time.
Press the key to save the selection.
Step 7
The Stage 1 Gap screen will display. Stage 1 Gap is
the size of the gap that the product will cook during
the first stage of a multi-stage product. (Note: Stage
1 gap is only used for multi-stage product.)
10:1 - CLAM
STAGE 1 GAP: 215
Step 8
Repeat Steps 2 - 4 to adjust the gap.
Press the key to save the selection.

Taylor C845 Specifications

General

Brand	Taylor
Model	C845
Category	Grill
Language	English