7-2
OPERATOR’S CHECKLIST
PH61 Peristaltic Pump
Operator’s Checklist
7
Winter Storage
If the place of business is to be closed during the winter
months, it is important to protect the freezer by following
certain precautions, particularly if the building is to be left
unheated and subject to freezing conditions.
Disconnect the freezer from the main power source to
prevent possible electrical damage.
On water-cooled freezers, disconnect the water supply.
Use air pressure to blow out any water remaining in the
condensers. This is extremely important. Failure to
follow this procedure may cause severe and costly
damage to the refrigeration system.
Your local Taylor distributor can perform this service for
you.
Wrap detachable parts of the freezer such as beater
assembly and freezer door, and place in a protected, dry
place. Rubber trim parts and gaskets can be protected by
wrapping with moisture-proof paper. All parts should be
thoroughly cleaned of dried mix or lubrication
accumulations, which can attract mice and other vermin.
To Next Page
Loading...
Need help?
General
