Taylor Wawa C708 - Parts Replacement Schedule; Recommended Replacement Schedule

Section 9
9-1
Model C708 - WAWA
Parts Replacement Schedule
9
Parts Replacement Schedule
Table 9-1
Part Description Every 3 Months Every 6 Months Annually
Scraper Blades X
Driveshaft Seal X
Freezer Door O-ring X
Front Bearing X
Front Beater Shoes X
Draw Valve O-rings X
Mix Feed Tube O-Rings X
Pump O-rings X
Pump Check Rings X
Pump Drive Shaft O-rings X
Rubber Poppet X
White Bristle Brush, 3” x 7” Inspect and replace
if necessary.
Minimum
White Bristle Brush, 3” x 1/2” Inspect and replace
if necessary.
Minimum
White Bristle Brush, 1-1/2” x 3” Inspect and replace
if necessary.
Minimum
White Bristle Brush, 1” x 2” Inspect and replace
if necessary.
Minimum
Black Bristle Brush, 1” x 2” Inspect and replace
if necessary.
Minimum
Double-Ended Brush Inspect and replace
if necessary.
Minimum
Yellow Bristle Brush Inspect and replace
if necessary.
Minimum
Brush-Syrup Port Inspect and replace
if necessary.
Minimum
Brush Set (3) Inspect and replace
if necessary.
Minimum
Brush-Pump Spout Inspect and replace
if necessary.
Minimum