TB-Electronics F-SCAN COMPACT - OPTION ChipCard: Usage with MinDevice; ChipCard with F-SCAN MinDevice

To Next Page

To Previous Page

- 37 -

ACT PROG TO ChipCard

If selected and confirmed with CENTER, the last

program chosen from the function INDIVIDUAL

APPLICATIONS will be copied to the ChipCard.

The procedure takes a few seconds.

Function of the CHIPCARD with an F-SCAN MinDe vice

If an INDIVIDUAL APPLIC ATION stored in an F-SCAN COMPACT

should be transferred to an F-SCAN MinDevice, the following

procedure applies:

Transfer the application from the COMPACT to a ChipCard using the

routine explained before. Remove the ChipCard and insert it into the

slot of the MinDevice with the chip pointing up. The MinDevice must

be “OFF”.

Switch the MinDevice “ON”.

The content of the trans ferred application is now read automatically

and stored in the device – the green LED in the middle blinks until

the transfer is completed.

Switch the MinDevice “OFF” and remove the ChipCard.