4
WEB PAGE
Multiple Users Multiple web pages (up to 4) can be opened at the same time
LAN Configuration View and set LAN configuration
SUPPLY CONFIGURATIONS
Local Control Supply may be controlled from the front panel even if operator is
monitoring via MODBUS TCP connection
MODBUS TCP
Remote Control
Supply may be controlled and monitored through MODBUS TCP
connection
RS232/485, USB or
LAN
MODBUS TCP interface can be disabled to use RS232/485, USB or
LAN interfaces
Analog Control MODBUS TCP can monitor power supply while analog control is used
INDICATORS
IP & MAC Addresses View addresses on front panel
Multi-Drop Address View RS485 address on front panel
Link & Activity LEDs Indicate Ethernet cable connected at both ends, defines connection
speed and LAN pa
ckets detected (LED per MODBUS TCP port)
Network Status LED Indicate no IP address or IP exception, an error, connection timeout,
waiting for first MODBUS TCP message or at least one MODBUS TCP
message received
Module Status LED Indicates no power, normal operation, fault or firmware update
SECURITY
Block All Protocols All protocols except MODBUS TCP are blocked
TCP Sockets Only TCP sockets (up to 4) can be opened
Single Port Only port 502 is listening
COMPLIANCE
UL, IEC, TUV, CE,
ROHS, etc…
Conformances that are granted to basic power supply also apply to
power supply with MODBUS TCP interface installed
To Next Page
Loading...
