Teac RC-L800 - Setting Device; Creating a New Device

ENGLISH FRANÇAIS ESPAÑOL
25
Setting a Device 1
Creating a New Device
Twelve device screens are factory preset as
defaults. When setting a new device, the preset
screen is assigned to the newly made device
automatically.
1. Enter the setup mode.
2. Press
5 or b to select DEVICE and press
ENTER.
3. Press 5 or b to select NEW and press
ENTER.
4. Press the device button in which the new
device is categorized.
5. Edit device label and press ENTER.
Editing the label:
< Press g or t to move the cursor.
< Press 5 or b to scroll through the characters:
A – Z, /, ?, –, 0 – 9 and space.
6. Press 5 or b to select device attribute and
press ENTER.
7. Press the button repeatedly to exit and
return to the previously displayed screen
layout.