How to solve problem when I cannot select the sampling frequency on Teac Voice Recorder?
If you cannot select the sampling frequency on your Teac Voice Recorder, adjust the setting to match the number of channels supported by the recording media.
What to do if Teac WX-7000 Voice Recorder RDX cartridge not recognized?
If the media is not recognized immediately after the removal and insertion of an RDX cartridge, turn the WX-7000’s power off and then on again.
General| Microphone | Built-in stereo microphone |
|---|---|
| Model | WX-7000 |
| Category | Voice Recorder |
| Recording Format | MP3 |
| Sampling Frequency | 44.1kHz |
| Bit Depth | 16-bit |
| Input | External microphone input (3.5mm mini jack) |
| Output | Headphone output (3.5mm mini jack) |
| Storage | MicroSD card |
| Dimensions | 120mm |
To Next Page
