4. PROGRAMMING OPERATIONS EO1-11154
4.7 Commercial Message Programming
4-19
(continued from the previous page)
Operation LCD Display Remarks
The [Enter] key depression results in
that the input message is entered and
displayed.
When the [Enter] key is depressed, the
message programmed in the 2nd line is
printed.
The [Enter] key depression allows the
ECR to enter the 3rd line message
input mode. (The [C] key depression
clears the message already
programmed.) The 3rd line message
is input.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[Enter] (No message was input in the 3rd
line.)
The [Enter] key depression results in
that the input message is entered and
displayed.
When the [Enter] key is depressed, the
message programmed in the 3rd line is
printed.
The [End] key depression allows the
ECR to end this programming.
A long receipt is issued and the display
returns to Main Menu screen.
NOTE: In the above example, characters except for alphabets are
entered using the character code entry method.
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
31-10-2005 MON #0
CM NAME
1
Open 8:0am to 7:00pm
2
Closed: every Wednesday
3
0026 18:10TM
To Next Page
Loading...
Need help?
General
