4. PROGRAMMING OPERATIONS EO1-11154
4.16 PLU Table Programming
4-50
3) Example
To delete PLU No. 0501 (Tuna Can) that was once programmed.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
twice.
The cursor is moved on to “3 DP/PLU”.
Depress the [3] or [Enter] key.
Depress the [↓] key.
Depress the [1] or [Enter] key.
“2 PLU” is selected.
Depress the [↓] key three times.
The cursor is moved on to “4 DELETE
(INDIV)”.
Depress the [4] or [Enter] key.
“4 DELETE (INDIV)” is selected.
Input 0501 (or 501), then depress the
[PLU] key.
(PLU Code 0501 is specified.)
PLU Code: Max. 4 digits (1 to 9999)
The [End] key depression allows the
ECR to end this programming.
A long receipt is issued and the display
returns to Main Menu screen.
To Next Page
Loading...
Need help?
General
