Chapter 14 Declaration of conformity to CE directives
Manufacturer: Altus-Escon-Company B.V. (Altesco)
Address: Drachmeweg 26
2153 PA Nieuw Vennep
The Netherlands
Equipment: Modules for testing class 1, 2, 3, 4, 5L, 7 vehicles for brake
and/or suspension and/or sideslip.
Equipment modules: DE9419/DE9719 brake tester series
Year of declaration: 2019
Altus-Escon-Company B.V. declares under his own responsibility that the above identified
products are conform to the international standards described in the Low Voltage Directive
2006/95/EC, the Machinery Directive 2006/42/EC and in the EMC Directive 2014/30/EU.
It is pointed out that it is not allowed to take modules into operation as part of a compounded
installation before the latter has been declared to comply with the Machinery Directive. Any
alteration to the equipment, improper use or installation voids this Declaration.
Most of the Altesco equipment modules conform to the national Dutch standard “Regeling
Voertuigen 2009” and are certified, possibly under a different model designation by
Nederlands Meetinstituut (NMi).
The Altesco equipment is provided with the CE-mark:
Nieuw Vennep, The Netherlands
Altus-Escon-Company B.V., Victor C. Stuyts, President
48
To Previous Page
Loading...