tecan Te-VacS User Manual (English)

Questions and Answers:

J
Joseph ColemanAug 4, 2025
What to do if there is no vacuum applied on Tecan Water Filtration Systems?
- J
  Jacqueline NguyenAug 4, 2025
  If no vacuum is being applied in your Tecan Water Filtration Systems, first ensure the plate is correctly placed on the sealing. Also, verify the vector setpoints for the gripping device. You might need to switch from a soft to a fast pumping procedure. Use the vacuum block sealing with the soft side (EPDM side) upwards, or replace it. Make sure to cover any unused wells to maintain proper vacuum pressure.
C
Corey BanksAug 9, 2025
Why is the gripping device crashing in my Tecan Water Filtration Systems?
- T
  Teresa OlsonAug 9, 2025
  A gripping device crash in Tecan Water Filtration Systems can occur if positioning pins or neighboring carriers block the arm access, or if the vector setpoints for the arm are incorrect. Check the positioning pins and the distance to the neighboring carrier on the worktable. Also, verify the vector setpoints for the arm.
P
petersonmarkAug 14, 2025
How to troubleshoot pressure loss in Tecan Water Filtration Systems?
- J
  Joseph OsborneAug 14, 2025
  Pressure loss in Tecan Water Filtration Systems is often due to a leak in the vacuum system. Check the tubing, tubing connectors, and sealings to identify any potential leaks.
J
jamiehoffmanAug 19, 2025
What to do if I observe pressure loss during application in Tecan Water Filtration Systems?
- K
  Kenneth GayAug 19, 2025
  Pressure loss during application in Tecan Water Filtration Systems may be due to a failed leak test. Check the tubing, the tubing connectors, and the sealings.

tecan Te-VacS Specifications

General

Brand	tecan
Model	Te-VacS
Category	Water Filtration Systems
Language	English

tecan Te-VacS User Manual

Table of Contents

Questions and Answers:

tecan Te-VacS Specifications