tecan Te-VacS - Preparing the Waste Bottle

5 - Operation
Putting into Operation
28 / 54 Tecan Vacuum Separator (Te-VacS™) Operating Manual, 391236, en, V4.0
5.2.2 Preparing the Waste Bottle
To prepare the waste bottle, proceed as follows:
1. Remove the waste bottle cap (A).
A
B
Illustration13: Preparing waste bottle
2. Ensure that the waste bottle is empty.
3. Ensure that the sealing (B) is properly placed in the bottle cap.
4. Manually tighten the bottle cap.
5. Clip the waste bottle to the bottle holder of the Te-VacS tower.